BAFO BF-120 - Manual (Page 4)

USB To Irda Adapter User’s Manual 3
* * * *
+) $,
$- $, $ ) +) $, $- $, $ ) +) $, $- $, $ ) +) $, $- $, $ )
IBM PC 486DX4-100 MHz or higher or compatible system
Available USB port
CD-ROM drive
Windows 98, Windows ME, Windows 2000, Windows XP.
. . . . /$ ) "!!" /$ ) "!!" /$ ) "!!" /$ ) "!!"
NOTICE: Before you install the driver to your computer, please do not connect
the USB to IrDA Adapter to your computer.
. 4 5 ) 6 21 /$ ) "!!"
Following the steps below to install driver of USB to IrDA Adapter :
6.1.1 Power on the computers that you will connect the USB to IrDA Adapter
and make sure the USB port is enabled and can working properly.
6.1.2 Put the driver CD into the CD-ROM and run the D:\Driver\BF-120
\Infineon\Windows\SETUP.EXE or D:\Driver\BF-120\Vishay 6101E
\Windows\SETUP.EXE or D:\Driver\BF-120\Vishay 6102F\Windows
\SETUP.EXE. (According with the different transceiver type, you
have to install the different driver.)
6.1.3 As the windows appear as below, click “NEXT” to continue.