BAFO BF-120 User Manual
Page 7
USB To Irda Adapter User’s Manual 6
.
4
5 )
6
/$
) "!!"
/$
) "!!"
/$
) "!!"
/$
) "!!"
Following the steps below to install driver of
USB to IrDA Adapter
:
6.2.1 Power on the computers that you will connect the USB to IrDA Adapter
and make sure the USB port is enabled and working properly.
6.2.2 Put the driver CD into the CD-ROM and run the
D:\Driver\BF-120
\Infineon\Windows\SETUP.EXE
or
D:\Driver\BF-120\Vishay 6101E
\Windows\SETUP.EXE
or
D:\Driver\BF-120\Vishay 6102F\Windows
\SETUP.EXE. (According with the different transceiver type, you
have to install the different driver.)
6.2.3 As the windows appear as below, click
“NEXT”
to continue.
6.2.4 You can choose the destination folder that you want to install or use the
default setting
(C:\WINDOWS\Sigmatel\USB-IR)
.