Cadac R-Type User Manual
6g8;2
Advertising
Table of contents
Document Outline
- Table of Contents
- General Precautions
- Introduction
- 1 The R-Type concept
- 2 System overview
- 2.1 The console
- 2.2 The Modules
- 2.2.1 Input channels, 8241- Mono, 8231- stereo.
- 2.2.2 Channel faders, 8246 mono, 8236 stereo.
- 2.2.3 Dual Output group modules, 8251
- 2.2.4 DC Master faders, 8255
- 2.2.5 L-C-R Master output module, 8261
- 2.2.6 Listen and Stereo output module, 8305
- 2.2.7 Oscillator and Communications module, 8271
- 2.2.8 CCM, 8282 and FCM, 8285
- 3 Connecting the mixer frames
- 3.1 Setting up the touring console
- 3.2 Frame rear connections
- 3.3 Connecting Power Supplies
- 3.3.1 Power supply description
- 3.3.2 AC power requirements
- 3.3.3 Switch-Mode Power Supply Units (8400)
- 3.3.4 Connecting to a 3-phase outlet
- 3.3.5 Main and extension frame power connections
- 3.3.6 Remote start of 8400 PSU
- 3.3.7 Switch-Mode Power Supply Units (8019 & 8020)
- 3.3.8 Remote start of 8019/8020 PSU
- 3.4 Connecting the console frames
- 3.5 Switching ON
- 4 How to use the R-Type
- 4.1 Channel assignment
- 4.2 Adding channels
- 4.3 Using the SENDS
- 4.4 How to use the L-C-R and L-R + C switches
- 4.5 How to use the Stereo bus and its output
- 4.6 How to assign outputs
- 4.7 How to SOLO a channel
- 4.8 How to apply PFL and LISTEN
- 4.9 How to operate HOLD/CHANNEL PRIORITY/ CLEAR & TALKBACK TO LISTEN
- 4.10 The CCM memory
- 4.10.1 How to store a console snapshot to the memory
- 4.10.2 How to recall a console snapshot from the memory
- 4.10.3 How to clear a memory from the CCM
- 4.10.4 How to clear all memories from the CCM
- 4.10.5 How to name the DC Master displays
- 4.10.6 How to name the DC Masters using a keyboard
- 4.10.7 How to move a scene in the memory list
- 5 Software and automation
- 6 Central Control Module 8281
- 6.1 Functionality
- 6.2 CCM front panel switches and displays
- 6.3 Fader Control Module (FCM)
- 6.4 Configuring the console system
- 6.5 Viewing and Changing DC and Mute Groups assignment of the faders
- 6.6 CCM operations
- 6.6.1 Memory set-up and editing
- 6.6.2 Editing the contents of Scene Memories
- 6.6.3 Editing the Scene name
- 6.6.4 Editing the Master Fader names
- 6.6.5 Editing MIDI
- 6.6.6 Editing Events
- 6.6.7 Editing Step time (and destination)
- 6.6.8 Editing X-fade time
- 6.6.9 Copying Scene Memories
- 6.6.10 Block
- 6.6.11 Insert/Delete
- 6.6.12 Dynamic actions in Scene Memories
- 6.7 CCM rear panel connectors
- 7 Mono Input Channel 8241
- 7.1 Mono Input Channel 8241 - front panel
- 7.1.1 Input Gain
- 7.1.2 PFL
- 7.1.3 Line-up tone
- 7.1.4 48V Phantom power
- 7.1.5 -20dB Pad
- 7.1.6 Phase reverse
- 7.1.7 Direct Output level
- 7.1.8 Direct Output Select
- 7.1.9 Output to Matrix
- 7.1.10 Sends 9A/B - 16A/B
- 7.1.11 Sends 1A/B - 8A/B
- 7.1.12 HF EQ Boost/Cut & Frequency control 1K5Hz - 15 KHz
- 7.1.13 HF Q-control
- 7.1.14 HMF EQ Boost/Cut & Frequency control 400Hz - 4KHz
- 7.1.15 HMF Q-control
- 7.1.16 LMF EQ Boost/Cut & Frequency control 60Hz - 600Hz
- 7.1.17 LMF Q-control
- 7.1.18 LF EQ Boost/Cut & Frequency control 20Hz - 200Hz
- 7.1.19 LF Q-control
- 7.1.20 EQ PRE INS
- 7.1.21 Equalizer IN
- 7.1.22 HP Filter IN
- 7.1.23 HP Filter Frequency control
- 7.1.24 PAN Left - Centre - Right
- 7.1.25 Centre switch
- 7.1.26 Centre level
- 7.1.27 PAN Control
- 7.1.28 Stereo
- 7.1.29 Stereo PAN to groups 9 - 12
- 7.1.30 Stereo PAN to groups 13 - 16
- 7.1.31 PFL
- 7.1.32 Matrix 13 - 16
- 7.1.33 Insert
- 7.1.34 MUTE
- 7.2 Mono Input Channel 8241 - rear panel
- 7.3 Mono Channel Fader 8245/8246 (motor fader)
- 7.1 Mono Input Channel 8241 - front panel
- 8 Stereo Input Channel 8231
- 8.1 Stereo Input Channel 8231 - front panel
- 8.1.1 Input Gain LEFT/RIGHT
- 8.1.2 MIC ON/OFF
- 8.1.3 Phase reverse
- 8.1.4 PFL - L and R
- 8.1.5 Line-up tone
- 8.1.6 48V phantom power
- 8.1.7 -20dB Pad
- 8.1.8 LEFT + RIGHT
- 8.1.9 Output to Matrix
- 8.1.10 Sends 9A/B - 16A/B
- 8.1.11 Sends 1A/B - 8A/B
- 8.1.12 HF EQ Boost/Cut & Frequency control 1K5Hz - 15KHz
- 8.1.13 HF Q-control
- 8.1.14 HMF EQ Boost/Cut & Frequency control 400Hz - 4KHz
- 8.1.15 HMF Q-control
- 8.1.16 LMF EQ Boost/Cut & Frequency control 60Hz - 600Hz
- 8.1.17 LMF Q-control
- 8.1.18 LF EQ Boost/Cut & Frequency control 20HZ - 200Hz
- 8.1.19 LF Q-control
- 8.1.20 EQ PRE INS
- 8.1.21 Equalizer IN
- 8.1.22 HP Filter IN
- 8.1.23 HP Filter Frequency control
- 8.1.24 PAN Left - Centre - Right
- 8.1.25 Centre switch
- 8.1.26 PAN Centre level
- 8.1.27 Left - Right switch
- 8.1.28 PAN Control
- 8.1.29 Stereo
- 8.1.30 Stereo PAN to groups 9 - 12
- 8.1.31 Stereo PAN to groups 13 - 16
- 8.1.32 PFL
- 8.1.33 Matrix 13 - 16
- 8.1.34 Insert
- 8.1.35 MUTE
- 8.2 Stereo Input Channel 8231 - rear panel
- 8.3 Stereo Channel Fader 8235/8236 (motor fader)
- 8.1 Stereo Input Channel 8231 - front panel
- 9 Outputs and Matrix 8251
- 9.1 Outputs and Matrix 8251 - front panel
- 9.1.1 Matrix Output level
- 9.1.2 MUTE
- 9.1.3 VCA
- 9.1.4 Insert
- 9.1.5 T/B
- 9.1.6 Listen
- 9.1.7 Output level meter
- 9.1.8 Matrix Outputs
- 9.1.9 Output panning
- 9.1.10 L-C-R panning
- 9.1.11 CENtre
- 9.1.12 L-R stereo panning
- 9.1.13 Stereo
- 9.1.14 Inject
- 9.1.15 T/B
- 9.1.16 Reverse
- 9.1.17 Level meters
- 9.1.18 Faders
- 9.1.19 MUTE
- 9.1.20 VCA
- 9.1.21 INSert
- 9.1.22 MTX PRE
- 9.1.23 LISTEN
- 9.1.24 Pre-INS monitor select
- 9.1.25 Pre/Post fader monitor select
- 9.1.26 MONO/STEREO
- 9.2 Output & Matrix 8251 - rear panel
- 9.3 DC Master fader 8255
- 9.1 Outputs and Matrix 8251 - front panel
- 10 L-C-R Output 8261
- 11 Osc & Communications 8271
- 11.1 Osc & Communications 8271 - front panel
- 11.1.1 Comms MIC Input
- 11.1.2 Check
- 11.1.3 LED meter
- 11.1.4 Oscillator
- 11.1.5 PNG
- 11.1.6 XLR
- 11.1.7 ON
- 11.1.8 Coarse
- 11.1.9 Fine
- 11.1.10 Osc frequency select
- 11.1.11 OSC/PNG to CHANNELS
- 11.1.12 OSC/PNG to GROUPS
- 11.1.13 Remote calling LED
- 11.1.14 Remote MIC 48V Phantom power ON
- 11.1.15 Remote MIC Gain
- 11.1.16 Remote Fine level
- 11.1.17 Remote MIC routing
- 11.1.18 Call Remote
- 11.1.19 Comms MIC
- 11.1.20 Talk to Bus
- 11.1.21 Talk to Line
- 11.1.22 Talk to Remote
- 11.1.23 Talk from Remote
- 11.1.24 Comms MIC 48V Phantom power ON
- 11.1.25 HP-Filter IN/OUT
- 11.1.26 PFL
- 11.1.27 LED meter
- 11.1.28 T/B MIC Gain
- 11.1.29 Talk to Bus - level adjust
- 11.1.30 Talk to Bus - pre-select
- 11.1.31 Talk to Line - level adjust
- 11.1.32 Talk to Line - pre-select
- 11.1.33 Talk to Remote - level adjust
- 11.1.34 Talk to Remote - pre-select
- 11.1.35 MUTE
- 11.1.36 T/B
- 11.2 Osc & Communications 8271 - rear panel
- 11.1 Osc & Communications 8271 - front panel
- 12 Listen & Stereo Output 8305
- 12.1 Listen & Stereo Output 8305 - front panel
- 12.1.1 LED level meters
- 12.1.2 Faders
- 12.1.3 Listen LEFT
- 12.1.4 Listen RIGHT
- 12.1.5 MUTE
- 12.1.6 LED level meters
- 12.1.7 Fader
- 12.1.8 PFL - select
- 12.1.9 PFL - Level adjust
- 12.1.10 Listen - select
- 12.1.11 Listen - level adjust
- 12.1.12 Ext I/P - select
- 12.1.13 Ext I/P - level adjust
- 12.1.14 Left output - Phase reverse
- 12.1.15 ALT O/P
- 12.1.16 L to L & R
- 12.1.17 R to L & R
- 12.1.18 DIM
- 12.1.19 MUTE
- 12.1.20 Headphones - source select
- 12.1.21 Headphones output
- 12.1.22 Headphones - MUTE
- 12.2 Listen & Stereo Output 8305 - rear panel
- 12.1 Listen & Stereo Output 8305 - front panel
- Appendices
- Glossary
- Index