Caple Di440 User Manual

Quick reference guide, Indicators options, Programme chart

Advertising
background image

5019 696 93138

GB

DI 440

Quick Reference Guide

Before using the dishwasher, read the user instructions!

CAP/I/FD/GB

(We reserve the right to make technical modifications)

Add rinse aid

Add regeneration salt

Only add regeneration salt immediately

before starting a wash programme.

“Delayed start” button

The wash cycle can be programmed
to start after 3-6-9 hours.
Then press the Start button.
The wash programme will start
at the set time.

“Half Load” button

This function can be used with any
programme. The indicator lamp lights
up. Load the upper or lower rack
only.

1)

Reference programme for energy label in compliance with
EN 50242 regulations;

2)

Refer to “User instructions”;

3)

Program data obtained in conformity with European
standard EN 50242. Values may vary in relation to usage,
e.g.: different loads, water temperatures - above or below
15°C - as well as water hardness and power supply
voltage, etc.

On button

Off button

Programme selection button

Start button

Switches “on” when the dishwasher is

operating. Flashes when a fault occurs.
Switches off at the end of the programme.

Indicators

Options

Programme chart

Detergent

2)

Consumption

3)

Programmes

Loading instructions

A

B

Litres

kWh

Minutes

Pre-Rinse

cold

Crockery to be washed later.

-

-

4.0

0.03

14

Quickwash

40°C

Lightly soiled crockery, with
no dried-on food.

X

-

10.0

0.65

30

Normal

1)

50°C

Normally soiled crockery.

X

X

13.0

1.24

128

Normal

65°C

Normally or heavily soiled crockery.

X

X

13.0

1.45

90

Intensive

70°C

Recommended programme for
heavily soiled crockery, especially
suitable for pans and saucepans.

X

X

14,0

1,70

140

Advertising