Hill climbing – Dodge 2010 Nitro User Manual

Page 314

Advertising
background image

lower gear than necessary to maintain headway. Over-
revving the engine can spin the wheels and traction will
be lost.

Avoid abrupt downshifts on icy or slippery roads, be-
cause engine braking may cause skidding and loss of
control.

Hill Climbing

NOTE:

Before attempting to climb a hill, determine the

conditions at the crest and/or on the other side.

Before climbing a steep hill,

shift the transmission to a

lower gear and shift the transfer case to 4L or 4LO. Use
first gear and 4L or 4LO for very steep hills.

If you stall or begin to lose headway

while climbing a

steep hill, allow your vehicle to come to a stop and
immediately apply the brakes. Restart the engine and shift
to REVERSE. Back slowly down the hill allowing the
compression braking of the engine to help regulate your

speed. If the brakes are required to control vehicle speed,
apply them lightly and avoid locking or skidding the tires.

WARNING!

If the engine stalls or you lose headway or cannot
make it to the top of a steep hill or grade, never
attempt to turn around. To do so may result in
tipping and rolling the vehicle. Always back straight
down a hill in REVERSE gear carefully. Never back
down a hill in NEUTRAL using only the brake.

Remember, never drive diagonally across a hill; always
drive straight up or down.

If the wheels start to slip as you approach the crest of a
hill, ease off the accelerator and maintain headway by
turning the front wheels slowly left and right. This may
provide a fresh “bite” into the surface and will usually
provide traction to complete the climb.

5

STARTING AND OPERATING

313

Advertising
This manual is related to the following products: