Comtest Networks 4192 POTS/ISDN Splitter Shelf - Manual

Rev 2-6 Sept. 2008 Page 1 of 6
Mounting Bracket
Mounting Hardware
Model 4192 POTS/ISDN Splitter Shelf Installation Guide
Copyright © 2008,
Comtest Networks Inc.
This guide provides the basic information required to install the Comtest Model 4192 POTS/ISDN Splitter Shelf on
a 19 or 23 inch rack assembly.
Unpacking the 4192 shelf
Before opening the 4192 shipping box, carefully inspect for any signs of damage. If the box has been damaged,
note the damage before opening the box. Open the box and remove the 4192 shelf and carefully examine it for
any damage. If the shelf is damaged, contact your supplier for instructions to return it for a replacement. If there is
no damage, verify that all packed items have been received. You should
receive the following:
• Comtest model 4192 shelf, part number SA-4192-7401
• Quantity 1 Rack Mounting Bracket Kit, part number: SA-4192-7417
o Quantity 2 Rack Mounting Brackets, part number SA-4192-7405
• Quantity 1 Cable Tie Kit, part number: SA-4192-7419
o Quantity 24, 8” nylon cable tie wraps, part number HW-CTS0-080N
o Mounting hardware kit, part number: SA-0000-0001, consisting of:
ƒ Quantity 4, 10-32 x 3/8 screws, part number HW-PP06-05SS
ƒ
Quantity 4, #10 external tooth lock washers, part number HW-
WE06-00SS
If any of the above items are missing, please contact your supplier.
Installation
The 4192 requires 4U (7.00 inches) of rack space. The shelf is supplied with mounting brackets and hardware to
allow installation in a 19 inch or 23 inch rack.
Preparation for Mounting
• 19 Inch Mounting:
For 19 inch mounting, the long side of the mounting bracket
is attached to the side of the shelf. There are three
positions to mount the bracket on the shelf and four
positions on the mounting bracket. The Rack Mounting
Bracket can also be mounted with the flange at the back.
Thus, there are 24 possible mounting positions for the Rack
Mounting Bracket. Choose a suitable mounting position for
the shelf then, using the provided 10-32 screws and lock
washers, attach the bracket to each side of the shelf. Place
the shelf in position on the rack and, using the appropriate screws
and lock washers, attach the shelf to the rack. Please note the hardware (screws) required to mount the shelf
to the rack is not supplied with the 4192 shelf mounting kit.