Daktronics Venus 7000 Controller Track User Manual

Daktronics venus, 7000 controller track setup guide

Advertising
background image

Daktronics Venus

®

7000 Controller Track Setup Guide

Daktronics, Inc.

PO Box 5128, 331 32

nd

Ave. Brooking, SD 57006

ED-12636 REV 1

www.daktronics.com

tel (605) 697-4036 or (877) 697-1115 fax (605) 697-4444

e-mail:

[email protected]

Page 1 of 10

NOTE: This reference is intended as a guide to help configure the

Venus 7000 controller to interface with Hy-Tek’s MEET MANAGER
for track and FinishLynx photo finish system.

STEP 1

Configure

RTD Inputs

Click on

<Configure>

shown in Figure 1. Next, select the

RTD Inputs file tab as seen in Figure 2. To edit an input,
highlight a number (i.e. 1:) and click on

<Edit Input>

.

STEP 2

Configure

RTD Input 1

Choose Input 1 and configure it per Figure 3 for a serial
connection from Hy-Tek’s MEET MANAGER.


























Figure 1: Venus 7000 Shell Menu

Figure 2: RTD Inputs

Figure 3:

RTD Input 1

settings for a serial

connection from the MEET MANAGER

Venus

®

is a registered trademark of Daktronics, Inc.

FinishLynx™ is a trademark of the Lynx System Developers, Inc.

Windows

®

and DOS

®

are registered trademarks of Microsoft, Inc.

Hy-Tek Meet Manager

®

is a registered trademark of Hy-Tek ltd.

Advertising