Daktronics Run Time Logging - Manual

Run Time Logging User’s Guide 1 of 10
PO Box 5128 201 Daktronics Dr Brookings SD 57006-5128
tel 605-697-4036 or 800-325-8766 fax 605-697-4700
www.daktronics.com
DD1774169 - 2009.08.19
Joe Schulte; Vaishali Patel
Cory Bell; Jordan Jones
Run Time Logging
Configuration
A sequence will not be available for customer and file association unless it has been played at least once from the
V7000 display program.
1. In the V7000 shell, click on the “Configure” button and then Click on the “Signs” tab.
2. Double click on the sign or select the sign and click edit.
3. After the sign has been selected, click the “Advanced” tab and make sure the check box to enable RTL is
marked.
4. Choose RTD inputs tab.
5. Double click on the the first input.