DoorKing 1812 Plus - Manual (Page 32)

2.5 Time Functions
2.5.1 Program Calendar Chip
This programming sequence programs the calendar chip in the 1812 system for the current time and
date. The calendar chip must be programmed if any of the time related features are going to be used.
Note: The clock / calendar chip in the 1812 Plus will keep time for approximately 48 hours if power to
the system is lost or removed. If power is off longer than this, the clock / calendar chip will have to be
reprogrammed.
1. Press * 3 3 and enter the MASTER CODE. [ * 3 3 _ _ _ _ (beep)]
2. Enter the current hour (01-12) and minutes (01-59) then press *. [ _ _ _ _ * (beep)]
Do not use military (24 hour) time format, simply enter the hour (2 digits) and the minutes
(2 digits). For example, 8:30 is entered as 0830 whether it is AM or PM.
3. Press 0 * for AM, OR press 1 * for PM. [ _ * (beep)]
4. Enter the month (01-12) day of the month (01-31) and the year (00-99) then press *.
[ _ _ _ _ _ _ * (beep)]
5. Enter the day of the week (1-7) then press *. [ _ * (beep)]
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
6. Press 0# TOGETHER to end. [0# (beeeeeep)]
EXAMPLE: Saturday, February 14th, 2009, 11:30 AM.
1. * 3 3 _ _ _ _ (beep)
2. 1 1 3 0 * (beep)
3. 0 * (beep)
4. 0 2 1 4 0 9 * (beep)
5. 7 * (beep)
6. 0 # (beeeeeep)
2.5.2 Call Forward Time
This programming sequence turns the call forward feature either ON or OFF and sets up a schedule
for the call-forwarding feature. You must also program a call forwarding number (2.5.3).
1. Press * 3 7 and enter the MASTER CODE. [ * 3 7 _ _ _ _ (beep)]
2. Press 0 * to turn call forwarding OFF, OR press 1 * to always call forward, OR press 2 *
to call forward per the call forward schedule. [ _ * (beep)]
You can terminate here (step 8) if you have previously programmed the schedule and
only ON / OFF or Call Forward per the schedule is desired.
3. Enter the begin time hour (01-12) and minutes (01-59) then press *. [ _ _ _ _ * (beep)]
4. Press 0 * for AM, OR press 1 * for PM. [ _ * (beep)]
5. Enter the end time hour (01-12) and minutes (01-59) then press *. [ _ _ _ _ * (beep)]
6. Press 0 * for AM, OR press 1 * for PM. [ _ * (beep)]
7. Enter the days of the week that the call forward time zone is to be active then press *.
[ _ _ _ _ _ _ _ * (beep)]
Sun = 1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
You can enter up to 7 numbers here (1-7). For example, for the hold open to be active
only on Saturdays and Sundays, enter 1 7. The order of the numbers is not important; 17
is the same as 71.
8. Press 0# TOGETHER to end. [0# (beeeeeep)]
Page 32 1812-161-E-1-10