Power supply interrupted during printing – HiTi P520L User Manual

Page 25

Advertising
background image

25

Attention: If the paper is used without cutting off the folded or printer section,
paper jam occurs every time or the ribbon may snap during printing. Always cut
off the creased or printed section of the paper.

Attention: Cut off the paper straight and at right angles to the roll paper
direction

Attention: If paper jam occurs frequently, a defect in the mechanical section is
assumed. Consult with HiTi dealers or service center.

Power Supply Interrupted During Printing
In the course of printing, in case of unexpected power interruption, please must
always repower on the printer to reset. Leaving this situation for a long time, the
shape of Platen can be warped. In order to avoid this situation, please follow the
instruction below.
1. Switch off the power of the printer
2. Always await 3 or more seconds for power on and off.
3. Paper jam is displayed on the LCD of the operation panel, open the front

cover and take the necessary actions according to the “Paper Jam” topics
instructs.









7.3
Pull out the paper until the paper sensor
indicator goes off.

Advertising