HiTi P520L - Manual (Page 6)

6
: Do not place the printer under a humid or dusty place. It can cause a fire,
electric shock or printer problem. Do not place the printer with dust, sand and high
humidity such as bathing place, bathroom, hot spring or the street.
: Do not place the printer on rickety place and/or inclined place. Printer
may fall down or tumble and it can cause serious injury.
＊
Attention: Keep the printer out of direct sunlight
＊ Do not put metallic objects or case/cup with any liquid on top of the printer.
Water spilt on metallic items fall into the printer may cause the fire and electric
shock. In case the water spilt or metallic items fall into the printer, please turn off
the printer power immediately.
: Do not block the openings of the printer. In case, the opening blocked,
the heat will remain inside and it can cause the fire.
: Do not insert or fall the metallic or flammable items into the printer
through the openings of the printer, it can cause the fire or electric shock.
◎
Handling Instruction
When handling the printer, please pay attention to the followings:
: Lift the printer from its box and put it onto a flat and firm table or desk.
: The printer alone (without paper and ribbon installed) is weighted
around 18Kgs. Please handle the printer carefully to prevent personal injury and
damage of the printer.