HiTi P520L - Manual (Page 7)

7
: When moving the printer, hold the bottom edge of the printer. It is
strongly recommended to handle the printer by one to two persons during the
transportation.
: Please take caution when transporting the printer on the slippery floor.
: Please make sure the power is off and the power cord is removed from
the printer before transportation.
: In the cause of dropping the printer during transportation, contact HiTi
dealers or service center for inspection of the printer. Using the printer with possible
damage without proper inspection may cause fire or electric shock.
＊
Do not dismantle or remodel the printer. Some sections of the printer contain a
high voltage or become very hot. Ignoring this warning may cause electric shock,
fire, or burns.
: Secure the power cable firmly while using.
: The thermal head reached high temperature during operation but it is
normal. Do not touch the thermal head by any case. Touch the thermal head may
cause person injury or damage of the printer.
＊
Attention: Touching the surface of the thermal head directly may cause damage
to the thermal heat. Hard objects getting into the printer may cause the damage
of printer or result in malfunction. In such case, please do not use the printer
while any obstacle inside the printer.
: Do not attempt to service the printer beyond the instruction specified in
this document. In case of irrecoverable problem, please contact HiTi dealers or
service center.