HiTi S420 - Manual (Page 24)

Note：
If your problems are not listed above, please contact HiTi service center nearest to you.
Note that during printer operation, it is normal for the LCD controller to become warm to touch.
Open and close the ribbon door again.
Re-install the ribbon cartridge
Replace the ribbon cartridge
Please use S420-compatible consumables
and check if consumables are correctly
placed in the paper cassette.
Indicator Status
Blinking x 1
Blinking x 2
Blinking x 3
Elinking x 4
Blinking x 5
Blinking x 6
Cover Open
Ribbon Missing
Ribbon Out
Paper Out
Paper Jam
Paper Mismatch
Problem Status Troubleshooting
Re-install photo papers and re-check
consumables status
Open the ribbon door and remove the
jammed paper.
23
Troubleshooting