ifm electronic JN2300 User Manual
ifm electronic Sensors
Advertising
Table of contents
Document Outline
- 1 Preliminary note
- 2 Safety instructions
- 3 Functions and features
- 4 Installation
- 5 Scale drawing
- 6 Electrical connection
- 7 SAE J1939 interface
- 8 Parameter mapping
- 9 Angle definition (0x2044)
- 10 Other sensor functions
- 10.1 Device address (0x2000) and baud rate (0x2001)
- 10.2 Limit frequency digital filter (0x2043)
- 10.3 Set zero point (0x2046)
- 10.4 Terminating resistor (0x2045)
- 10.5 Set teach (0x2042h)
- 10.6 Quadrant correction (0x2040)
- 10.7 Heating (0x2041h)
- 10.8 MEMS measuring cell temperature (0x2081)
- 10.9 MEMS self-test (0x4008 / 0x4009)
- 10.10 Programming key (0x3000)
- 11 Status LED
- 12 Maintenance, repair and disposal
- 13 Approvals/standards
- 14 Factory setting