JayBird JF4 User Manual

User guide, Install ear cushions, Outdoors / gyms

Advertising
background image

IN THE BOX

JF4 Freedom Sprint Bluetooth Headphones
Magnet Sealed JayBird Carry Case
3 pairs regular eartips (S,M,L)
3 pairs secure fitting ear cushions (S,M,L)
1 pair of optional ear hooks
USB Cable
User Manual

CHARGING

Charging the battery before use is recommended but
not required. The headphones ship pre-charged
however initial charge will vary.

Low battery is indicated by the status indicator blinking
red with an audible tone every 20 seconds. Connect
micro USB charging cable with the charging port of
headphones under the USB cover on the right earpiece.
Connect cable to the USB slot of any PC or Mac. The
status indicator will be red while charging and will turn
off when fully charged. JayBird also offers an AC power
adapter (sold separently).

PAIR MODE

Begin with headphones powered off.
Push and hold top button for 8 seconds
until status light alternates red and blue. You
are now in pair mode. See your phone/music
device manual for pair instructions.
Pass code is 0000.

8 sec

PAIR MODE (detailed step by step instructions)

1. Place headphones and mobile phone within 1 meter of each other.
2. Put headphones into pair mode by pushing top button for 8 seconds (LED will flash red & blue).
3. On your music device, turn Bluetooth on and search for Bluetooth devices.
Select “Freedom 4” in the Bluetooth device list.
4. Enter password or PIN No:”0000” on your mobile phone if prompted.
5. If required, after pairing, select “Freedom 4” in the Bluetooth device list and press “connect”.
6. After successful connecting, the blue light blinks twice every 4 seconds.

PAIRING WITH A BLUETOOTH ADAPTER

1. Place headphones and mobile phone within 1 meter of each other.
2. Put the headphones into pair mode as outlined on prior page.
3. If using BAU Universal Bluetooth Adapter put adapter into pair mode also (see BAU manual).
4. Plug the Bluetooth adapter into the music device and play a song.
5. The headphones and adapter will pair automatically (pass code of adapter must be 0000)
6. After successful pairing and connecting, the LED status indicator on the headphones will blink
twice every 4 seconds.

POWER ON/OFF

Power on: Push & hold top button for 6 seconds.
Power off: Push & hold top button for 3 seconds.

Note
- If the pairing is not successful, switch off headphones by pushing the top button for 3 seconds, and then re-pair according to the steps outlined above.
- After pairing is successful, paired devices will remember each other. Unless pairing information is deleted, there is no need to pair again.
- The headphones will connect with the latest paired device. If you want to pair with other Bluetooth devices, switch off the Bluetooth function of the
current Bluetooth device, and then pair and connect it with the new Bluetooth device according to steps outlined above.

Note
Freedom Sprint does not support apt-X CD quality audio even though it’s offered on JayBird Bluetooth adapters.

PAIRING WITH SEVERAL BLUETOOTH DEVICES

The headphones can connect with two devices at most. A mobile phone with
HFP profile; and a device with A2DP profiles. If you want to pair two Bluetooth
devices, please refer to the following steps.

1. Firstly, pair the headphones with the Bluetooth adapter
2. Disconnect the Bluetooth adapter from the iPhone or iPod
3. Pair and connect the headphones with the mobile phone
4. Reconnect the Bluetooth adapter, will connect with headphones automatically.

Not all the mobile phones support all the functions listed. Please refer to the instruction of your mobile phone. When the volume is adjusted to max or min,
you will hear a indication sound. For some mobile phones, when you accept a call on the phone, the call will be sent to the mobile phone. You can switch the
call to headphones by using top button on headphones or through phone. Please refer to the instruction of your mobile phone for further information.

Function

Status

Indication

Operation

Voice dial

Standby mode

Short tone

Press & hold top button for 2 seconds

Redial

Standby mode

Short tone

Double click top button

Volume Up

Music/Call mode

NA

Short presses of Vol+ button

Volume Down

Music/Call mode

NA

Short presses of Vol - button

Answer Call

Incoming Call

Short tone

Press top button

Reject Call

Incoming Call

Short tone

Press & hold top button for 2 seconds

End Call

During Call

Short tone

Press top button

During Call

Short tone

Press & hold top button for 2 seconds

Mute

During Call

Dbl tone 5 sec Double click top button

Unmute

During Call

NA

Double click top button

Switch b/w phone
& headset mode

Note

Mobile phones that support HSP and A2DP profiles simultaneously may block the
Bluetooth adapter from reconnecting to the headphones.

Key

Short push of adjacent button
Push and hold of adjacent button

For some of mobile phones, when they are playing music, the music will transmit to the speaker of mobile phone. If this happens, select “transmit the
sound through Bluetooth” in the “setting” of music play interface, and then choose "Freedom 4” in the device list. Please refer to the instruction
of your mobile phone for further information. When the volume of headphones is adjusted to max or min,you will hear a tone. Remote control the
function such as next track, previous track, etc require your mobile phone to support AVRCP. Please refer to your mobile phone user manual or
Bluetooth transmitter for further info.

Function

Status

Indication

Operation

Volume up

Music/Call mode

NA

Short presses of Vol+ button

Volume Down

Music/Call mode

NA

Short presses of Vol - button

Play/Pause

Music Mode

Short tone

Press top button

Next track

Music Mode

Short tone

Long press of Vol - button

Back track

Music Mode

Short tone

Long press of Vol + button

Charging LED Indicator Status of headphones

Red light is on

Charging

Red light is off

Finished charging

Pairing LED Indicator

Status of headphones

red and blue alternating

Pair Mode

Blue double blink every 2 sec

Standby mode

Blue periodic blinking

Connected to device

Red double blinking over 30 sec Low battery

Tone Indicator

Status of headphones

Two tones every 5 sec

Conversation mode and mic mute

Tone every 30 seconds Low battery

JF4 Specifications

Bluetooth Version

V2.1 + EDR

(newer versions offer no

benefits for headphones)

Profile

Headset, handsfree, A2DP, AVRCP

Effective Range

10 meters (30 feet)

Working time

Music & calls up to 4.5 hours

Standy time

Up to 150 hours

Input voltage

DC 5A 100mA

Charging time

Approximately 2 hours

Dimensions

16 x 35 x 8 mm

Weight

Approx 16 g

Care and maintenance

Keep dry and do not store in a damp place
Do not put the product in direct sunlight for extended periods of time
or in hot areas.
High temperature will shorten the life of the electronic device, destroy
the battery, and distort certain plastic.
Do not expose the product to extreme cold.
Do not disassemble the product.
Do not drop the headphones.
Do not use chemicals or detergent to clean the product.
If the product fails to work contact JayBird support at jaybirdgear.com

INSTALL EAR CUSHIONS

Three sizes of patented
secure fit ear cushions
are included. The correct
size for your ear will be
the ones which fit snugly
into the bowl of your ear
and lock into the top as
shown. Further guidance
on the next 3 pages.

01

LEFT (L) AND RIGHT (R) MARK ON TOP SIDE

CUT AWAY FOR POSITIONING GUIDANCE

02

OUTDOORS / GYMS

KEEP THE MUSIC DEVICE AT OR ABOVE WAIST LEVEL ON YOUR RIGHT SIDE

THE SAME SIDE AS THE HEADPHONE ANTENNA.

Your body is 80% water. Water blocks low power radio signal like Bluetooth.
In the absence of nearby ceilings for signal bounce, your body can block the
signal between the music device and the headphones. When outdoors or in
gyms the use of armbands or wrist-worn music players are recommended.
Having your music player in your pants pocket below waist level may produce
varied results as your body can get between the music device & headphones.

03

L

M

S

LOCK THE TIP OF THE EAR
CUSHION INTO THE TOP OF
THE BOWL OF THE EAR AS
SHOWN.

YOU SHOULD HAVE A SNUG
FIT WITH CONTACT ON THE
LOWER, BACK AND TOP
PORTIONS OF THE BOWL OF
THE EAR.

WHEN OUTDOORS WEAR
YOUR MUSIC DEVICE IN
THIS ZONE TO AVOID
SIGNAL BLOCKAGE
FROM YOUR BODY.

HAVING THE DEVICE IN A
POCKET ON YOUR LEG MAY
PRODUCE VARIED RESULTS
AS YOUR UPPER BODY CAN
GET BETWEEN THE DEVICES.

LET US TAKE CARE OF YOU

TAKE A MOMENT TO REGISTER YOUR
LIFETIME WARRANTY AGAINST SWEAT

jaybirdgear.com/intheclubnow

No login or account setup required.

04

TAKE CARE OF YOURSELF AS WELL
& LISTEN RESPONSIBLY

Avoid excessive volume levels
and prolonged periods of listening.
Do not use around road traffic.

USER GUIDE

FREEDOM SPRINT BLUETOOTH HEADPHONES (JF4)

BEFORE WE GET STARTED

REMEMBER THESE 4 THINGS...

COMMANDS

WARRANTY

Full warranty details at jaybirdgear.com/warranty
+1.866.244.3399

WARNING: Due to the isolating characteristics of these headphones do not use while driving, Riding a bike or where vehicular traffic
is present, or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at
excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to
inserting objects into ear canal, use at own risk.

Copyright 2011 JayBird Gear LLC. All rights reserved. JayBird, and the JayBird logo are trademarks of JayBird Gear LLC.
Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to JayBird Gear LLC. iPhone is a trademark of
Apple, Inc., registered in the U.S. and other countries. Manufactured under European patent no EP1410607B1 &
corresponding foreign patents. Assembled in China

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications to device will void the user’s authority to operate the device. The battery is recycled.
Do not dispose of the battery in fire, as it may cause explosion.

TO COVER ALL FITTING
PREFERENCES, EARHOOKS
ARE INCLUDED AS AN
ALTERNATIVE SECURE FIT
OPTION.

MAKING A CALL

PLAYING MUSIC

STATUS LIGHT

SPECIFICATIONS & CARE

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

20

21

22

3 or 6 sec

LED status light

GREAT SOUND PERFORMANCE IS IN
SELECTING THE RIGHT SIZE EARTIP

WE LOVE GREAT SOUND. MAKE SURE YOU HEAR IT.

Because everyone’s ears are different, make sure to try out all sizes of
eartips. Only with the perfect size eartips will you enjoy snug fit &
optimum sound quality.

Advertising