LEI Electronics PLJOGBK User Manual

Page 4

Advertising
background image

- 3 -

3. Charging

The PLJOGBK uses a 2.0 mm jack charging socket.
1. For first time use, charge the device for no less than 2 hours to make sure the

headset is fully charged and the battery reaches its full capacity.

2. Each charge cycle thereafter may take around 2 hours.

3. LED will indicate red when charging and will turn off when charging is complete.

4. If you have not used the item for a few months, the LED might not turn red when

charging is started. It might take 15-35 minutes before the LED turns red.

Notice:
• Use the supplied certified charger only, or consult technical support if you intend

to use other 3rd party charger(s).

• When the battery power is low, the red indicator light will flash red every 15 seconds.

4. Turn On / Off

Turn On: From OFF, press and hold the MFB around 4 seconds until the indicator

LED shows Blue.

Turn Off: From ON, press and hold the MFB around 4 seconds until the indicator

LED shows red.

5. Using with mobile phone

It is important to pair the headset with your Bluetooth Mobile phone for first time use.

Advertising