Lumens Technology PS750 - Manual (Page 25)

English - 24
8.9 I would like to capture images
8.9.1 Setting the quality of captured images
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [MENU] to exit.
8.9.2 Setting continuous capture
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to find [Capture].
4. Press [] or [] to select [continuous].
5. Press [] to find [Capture Time]; Press [] or [] to select time
settings.
6. Press [] to find [Capture Interval]; Press [] or [] to select time
settings.
7. Press [MENU] to exit.
8.9.3 Capturing and saving images
1. Press [CAPTURE] on the remote control or control panel.
<Remark> If the capture mode is set to [continuous], press
[CAPTURE] to capture images continuously, press [CAPTURE]
again to exit.
8.10 I would like to view captured images
<Note> Images over 8 MB, cannot be played. Whilst playing, the
[Rotate] function can be activated to rotate the images.
1. Press [PLAYBACK] on the remote control or control panel to
display thumbnails of all captured images.
2. Press [] or [] or [] or [] to select the thumbnail you want you
view.
3. Press [ENTER] for the full-screen display of the image.
4. Press [] or [] to turn to the previous/next image.
5. Press [MENU] to exit.