Lumens Technology PS750 - Manual (Page 28)

English - 27
1. Press [SLIDE SHOW] to start playing.
2. Press [SLIDE SHOW] again to stop playing.
8.16 I would like to view the X-ray film
1. Place an X-ray film to be displayed under the camera.
2. Press [Lamp] button on the control panel to switch on the Backlight (in
the sequence of arm lamp/backlight/OFF)
3. Press [AUTO TUNE] button to optimize the image.
8.17 I would like to compare images (PBP)
This function will compare and contrast a live image with a captured image.
Use Remote control
1. Press [PBP] to enter the PBP (Picture by Picture) photo selection
screen.
2. Press [] or [] or [] or [] to select the file to be compared.
3. Press [ENTER] to activate image comparison.
4. Press [] or [] to move the image left or right.
<Remark> Press [ENTER] to switch between the captured and
live images.
5. Press [PLAYBACK] to return to image thumbnails.
6. Repeat Steps 2 ~ 4.
7. Press [MENU] to exit.
8.18 I would like to resume the factory default setting
(Factory Reset)
8.18.1 Use the OSD menu
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Advanced] menu.
3. Press [] to the [Factory Reset].
Captured Image Live Image
C1
C3
C2
C4
C5 C6 C7