Lumens Technology VC-A20P - Manual (Page 23)

English - 22
AF speed Fast / Normal Focus speed after AF triggering
AF Frame
Full Frame /
Center
AF frame setting, when central area
was set as AF frame, focusing will be
on the center of the screen. When Full
Frame was set as AF frame, focusing
will be calculated based on the full
screen
Ethernet
DHCP On/Off
Enable/Disable DHCP setting using left
and right arrow keys and press
[ENTER] to apply setting.
IP Address 192.168.100.150
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.
Subnet mask 255.255.255.0
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.
Geteway 192.168.100.254
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.
System
C-Video
NTSC LB
Image mode
NTSC CP
NTSC SQ
PAL LB
PAL CP
PAL SQ
Prompt On / Off
Turn on/off the prompt information on
the display
IR Receive On / Off Turn on/off the infrared reception
Language English / Chinese Language
Output Mode
1. 1080p/60
2. 1080p/59.94
3. 1080p/50
4. 1080p/30
5. 1080p/29.97
6. 1080p/25
7. 1080i/60
8. 1080i/59.94
9. 1080i/50
10. 720p/60
11. 720p/59.94
12. 720p/50
Set output resolution
Protocol
Protocol V/
Protocol PD Protocol V: VISCA
Protocol PD: PELCO D
Factory Reset On / Off Resume the factory default setting
FW Upgrade On / Off Upgrade Firmware
Status Display the current setting status