Lumens Technology CT-I30 - Manual

Put hand screw
through the
horizonital
metal plate
Acomplished Assembled the
grommet set
between both sides
of the table hole
Remove the
waterproof cover
then put the rubber
Use the tool 
to lock arm
＊ When the base and arm joints are loose, use the long side of tool  to lock arm.
Body Tool Tool
Cable
Management Rubber Base
x1 x1 x1 x1 x2 x2
Key
x1
x1
EVA
Important
＊ Please activate your warranty at www.MyLumens.com/reg
＊ To ensure successful installation, please be sure to follow each
of the following steps.
＊ To download the latest version of Quick Start Guide, multilingual
user manual, software, or driver, etc., please visit Lumens TM
http://www.Mylumens.com/support.php
www.MyLumens.com
1. Accessories
CT-I30 Installation Guide
2. Arms Installation
3. Pad Installation
Caution: Claws can only be adjusted in “unlock” position do not try to adjust the claws in “lock” position.
Use key to unlock the security lock Unlock the claw lock
Pull out each fixed claw to extend position Place pad product
Push the claws toward PAD to be fixed and locked
by switch, then press the knob in the security
lock position
Additional EVA cushion available
in the package for thinner devices
Paste EVA cushion to the
indicated position on the holder