Luxi Electronics DIY-30BS10 - Manual

Website:
www.luxielectronics.com
Email: [email protected]
Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
HD DIY user manual ribbon wires Revision: 2.00 Date: 1/26/2015
US patents: 8002572, 8500489, 8507796 issued; others issued or pending in multiple countries
For terminating HDMI ribbon wires
Thank you for purchasing the Luxi Electronics patented HD DIY (Do It Yourself) field termination products.
If you are an experienced installer with the DIY products, you can just print out this first page with wire
color coding picture for your reference. If you are new to the DIY products, please make sure you read
through all the pages before performing the termination.
Making a new cable:
Luxi Electronics is the patent owner of these HDMI ribbon wires and the matching DIY connectors, and
the only manufacturer of these products, thus the color coding is consistent and product compatibility is
guaranteed. Just follow the instructions below.
Repairing one end of an existing cable:
Since this HDMI ribbon wires are new, there should be no existing HDMI cables in the installations using
the HDMI ribbon wires; thus the repair cannot be made by these DIY connectors for ribbon wires. Please
refer to the Luxi HDMI DIY connectors for regular wires for repair purpose.