Maytag MTUC7500ADM Dimension Guide User Manual

Compactor

Advertising
background image

Compactor

PRODUCT MODEL NUMBERS

OVERALL DIMENSIONS

CABINET OPENING DIMENSIONS

CUSTOM PANELS

CLEARANCE DIMENSIONS

MTUC7000AW

MTUC7500AD

This compactor is for use on a single phase,
115-volt, 60 Hz, AC only, 15- or 20-amp fused and
properly grounded circuit and is equipped with a
grounding plug as shown below. It is recommended
that a separate circuit serving only this appliance be
provided.

18" min.

(45.7 cm)

24" min.

(61 cm)

A

15 min.

(38.7 cm)

34 " min.

(87 cm)

3" min.

(7.6 cm)

"

A

B

34

1

8

"

(86.7 cm)

24"

(61 cm)

15"

(38.1 cm)

29

³⁄₈

"

(74.6 cm)

15"

(38.1 cm)

25"

(63.5 cm)

15"

(38.1 cm)

Models with handles

Models without handles

23

¹³⁄₁₆"

(60.5 cm)

15"

(38.1 cm)

15"

(38.1 cm)

25"

(63.5 cm)

1. Grounded electrical

outlet must be a
minimum of 3" (7.6 cm)
away from surrounding
cabinets or nearby walls
as shown. It can be
placed either to the left
or the right side of the
product.

Panel should be

¹⁄₂" (13 mm)

min. thickness

1. Leave 6" (15.2 cm) of clearance

space to the right side of the
compactor in order to remove
the compactor bags.

2. Leave 23" (58.4 cm) of

clearance in front of the
compactor in order to fully open
or remove the compactor
drawer.

Panel should be

¹⁄₂" to ⁵⁄₈"

(13 to 16 mm) thick.
NOTE: A thicker panel may
need rounded front corners
and a cutout for access to
the handle.

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.

W10190314-D-MT

5/5/2014

Without Trim Kit

Advertising
This manual is related to the following products: