Memphis MXA-LED User Manual

Mxaledctr

Advertising
background image

16-MXALEDCTR

Installation:

Connect + 12V Power to the red wire from a fused source. Installation of a switch

between the 16-MXALEDCTR and +12V power source can prevent battery drain when not in use. If
using the Remote Turn On lead from a Head Unit, make sure to use a relay to prevent damage to the
Head Unit. Connect Ground to chassis ground. Use supplied pig tail harness from the 16-MXALEDCTR to
extend wiring were needed to supplied pig tail harness of 16-MXASP2 and 16-MXASB1 LED Rings.
Installation of 16-MXALEDCTR inside metal enclosures will interfere with the Remotes connectivity.

Advertising