Methven Tahi Satinjet Shower Kit - Manual

Issue A 435023
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com or call Customer Service
New Zealand
0800 804 222
Australia
1300 638 483
UK
0800 195 1602
TAHI SATINJET SHOWER KIT
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min 1.5 bar, Max 5 bar.
If supply exceeds 5 bar, a pressure
limiting valve must be installed.
Operating Temperature:
Max 70°C.
Notes:
After installation all connections ●
must be checked for leaks.
All installations must be carried ●
out in compliance with relevant
water regulations.
AdJuSTmENT
Shelf adjustment Handset holder tension adjustment
UN-LOCK
LOCK
Located at the
back of slider
Thumb screw
Adjust the tension on the handset holder by rotating the
thumb screw.
CLEANING
Water contains lime which remains on the surface after
the water has evaporated. These lime deposits can be
prevented from forming by wiping immediately after use.
To clean the chrome-plated surfaces use a soft cloth,
soap and warm water. Never use cleaning agents that
contain a corrosive acid or a scouring additive.
Do not use any
sharp objects to
clean nozzles.
Clean filter washer
periodically.