Denso BHT-400B-CE - Manual (Page 133)

Chapter 2 Getting Started the BHT and System Menu
2.6 Wireless Zero Configuration (WZC)
The screen on the left displays when booting up the BHT for the first
time or if a Wireless local area network (Wireless LAN) environment
has not yet been established following purchase of the BHT unit.
(BHT-400BW-CE only)
If this screen does not display, double-tap the Wireless Zero
Configuration status icon in the task tray to display.
Wireless Zero Configuration status
Configuration (WZC) radio is connected to a wireless
network.
Configuration (WZC) radio is not connected to a wireless
network.
Synchronization state
Displays when the wireless device is open.
Shows the radio field intensity with the number of bars.
The WZC menu has the following tabs:
IP Information: Displays information such as the IP address.
Wireless Information: Used to perform wireless communication
settings.
The radio field intensity icons ( , , and ) indicate that
the radio link is established but do not assure you that there
will be few communications errors.
113