Posiflex SD-680 - Manual

Page 1 / 2
SD-680 Series
UPGRADE KIT
USER’S MANUAL
Rev. : A0
I. FEATURES
l Upgrade kit for fan free touch terminals KS-6812 series
l Magnetic Stripe Reader in USB full speed HID interface
l Options for MSR heads covering ISO 1&2, all 3 tracks or JIS I/II
l 3 tracks type MSR can read also AAMVA and CA DMV card
l Optional optical Finger Print Sensor in USB interface
l Industry's most accurate fingerprint algorithm
l Total power consumption: 300 mA @ 5V DC through proprietary USB port
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct
the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult
his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Technologies, Inc.
further disclaims all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire
risk arising out of the use or performance of the software and documentation remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the upgrade kit SD-680 for the Posiflex fan free touch terminals
KS-6812 systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to accommodate the
required security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational aspects of these units.
For technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.
The manufacturer of the SD-680 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due
to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any of
our web sites: http://www.posiflex.com or http://www.posiflex.com.tw.
 Copyright Posiflex Technologies, Inc. 2009
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Technologies, Inc. the publisher of this
documentation
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Technologies, Inc. an ISO-9001 and ISO-14001 certified manufacturer.
Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.
II. INSTALLATION
1. HARDWARE INSTALLATION
Remove the 2 screws on back of the right side of the main unit
of the KS series as circled in the left picture to remove the cover
for side mount upgrade kit. Take out the cable inside this cover
and connect it to the white connector inside the side mount
upgrade kit like SD-680 as arrowed in the right picture. Gently
arrange the excessive length of this cable back in the hole and
screw-fit it back to the position originally occupied by the cover.
Please reserve the cover if there is chance to have the side mount kit removed in the future.
2. DRIVER INSTALLATION
1. For MSR: The magnetic stripe reader in SD-680, no matter how many tracks are in the
reader head, connects to the host through the proprietary internal USB port working as a
USB KB and therefore requires no driver installation. For application in OS other than
Windows (such as MS-DOS or Linux), some technical internal modifications will be
required and it is most advised to specify such conditions clearly when ordering the SD-680.
For application in MS-DOS please enable the USB keyboard and set USB operation mode
to Full/Low Speed in system CMOS setup. Refer to “Operation Guide” for manipulation
over the reader configuration.
2. For Finger Print Sensor: To include the drivers for this sensor to perform finger print
registration or verification (authentication) in an AP requires the software programmer to
purchase and utilize its SDK (software developer’s kit). However, Posiflex delivers this
optical finger print sensor with its drivers. Please find in the mini CD delivered with SD-
680 or Product Information CD delivered with Posiflex POS system the folder for “Posiflex
Optical Finger Print Sensor”.
P/N: 19850901020
警告使用者
這是甲類的資訊產品，在居住的環
境 中 使 用 時 ， 可 能 會 造 成 射 頻 干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T31454