Progressive Turf Equipment 522427 User Manual

Td 92 anti scalp roller kit installation

Advertising
background image

1

February 2002

TD 92 ANTI SCALP ROLLER KIT INSTALLATION

CONTENTS OF KIT:

LEFT HAND CORNERS

RIGHT HAND CORNER PINS

1. Use the Backing Plate and bolt it to the back of the Deck to use as a template for drilling the

17/32” mounting holes.

2. Align the plate up with the plate on the back of the mower. On the right hand side use the 4 –

½” washers as spacers to correct for the 3/8” flat bar.

Roller, Pin, Cotter Pin
Qty 6 of Each

Mounting Hardware
½” x 1 ¼ - Qty 10
½” x 1 ½ - Qty 2
½” Flat Washer Spacers

Backing Plate – Qty 4
Also Used for Drill Template

Mounting Bracket
Right Hand – Qty 3
Left Hand – Qty 3

Advertising