RADO Chronograph_TheOriginal - Manual

Diagram key
A) button A: start – stop
B) button B: reset to zero, inter-
mediate time
Watch
C) hour hand
D) second hand
E) minute hand
F) date display
Chronograph display
G) hour counter
H) minute counter (red)
I) second counter
J)
1 ⁄
10
th second counter
Setting the time and date
Crown positions (see diagram):
0 = normal position (crown pres-
sed against case)
1 = quick adjustment of date and
hour hand
2 = adjustment of time setting
Setting the time
Pull out the crown to position 2.
The second hand stops moving.
Set the correct time by turning the
crown, then push the crown back
in to position 0 to restart the
watch.
Instructions for use of the Chronograph ‘The Original’
You have acquired a chronograph that unites ageless design and advanc-
ed technology in an exceptional time piece: reliable, scratchproof and
water-resistent to a depth of 30 m (98 ft), exactly as one has come to
expect from a Rado watch. The chronograph functions are easy to operate
and allow time measurements accurate to
1 ⁄
10
th of a second.