Daxten RACKACCESS 16I - Manual (Page 6)

7. Power switch
Use the power switch to turn ON or OFF power. We recommend turning your system on first, then the
LCD monitor.
Adjusting the Monitor
The LCD monitor is designed to work with a range of compatible video adapters on the market. Due to
all the possible variations between these video adapters, you may need to adjust the settings for your
video card.
Adjustment Procedure
First, you must activate the OSD screen through pressing the MENU key, the OSD menu will show in
the centre of screen as below
Figure 1 - The OSD Screen
Pressing the OSD Menu button causes the OSD menu screen to appear.
- Use the + + & ▬ ▬ keys to select desired group of options.
- Use ▼ ▼ key for sub menus or select item to change.
- Use the + + & ▬ ▬ keys to change the value.
- Use ▲ ▲ to go back one level
Press the Menu button to exit the OSD
Display current timing
information
Brightness and Contrast
Adjustment
Adjusts the Brightness
value
Adjusts the Contrast value
(Valid only when your
colour temperature is set to
user mode)
Return to the previous
Menu
Colour Temperature
Adjustment Display Quality
Adjustment
Enables or disables the
sRGB values
Auto Adjust - use this
option to apply setting
automatically
RackAccess i Series 5 User Guide