Space Ray LTS Series Two Stage - Manual (Page 32)

Form #43155040
May 2013
-31-
4. Replace the motor and blower assembly. Tighten the locknuts.
5. Horizontal and 45º draft inducer positions can allow the plastic vacuum air tube to sag. The air tube
should be shortened to prevent a downward sag that could allow condensation build-up in the tube.
Mounting
Bracket
Plastic Vacuum
Air Tube
Motor and Blower
Wheel Assembly
1/4-20 Locknut
JUNCTION BOX
(Must be in a
HORIZONTAL position.)
Vertical
45 Deg.
Horizontal
45 Deg. Angle Mounting
LTS Series
Junction Box
Horizontal
Vertical
45 Deg.
Horizontal
Horizontal Mounting
LTS Series
Junction Box
Horizontal
40 Deg.
Horizontal
Vertical
40 Deg. Angle Mounting
LTU Series
Upright Position
Junction Box
Hoizontal Mounting
LTU Series
45 Deg.
Vertical
Horizontal
Junction Box
Control
Box
Upright Position