Thunder Tiger GT5.2 USB Interface Dongle - Manual

Step 1: Install software
Step 1-1:
For Microsoft Windows system
Execute the GT5 tools.exe
Step 1-2:
Setup wizard will guide you finish the installation step
by step.
GT5 USB Interface Dongle
Instruction Manual
Introduction
Congratulation on your purchase of ACE RC GT5 USB dongle.
Using the GT5 dongle the firmware can be updated as well as
the parameter can be modified on your PC.
Product No. 2709
Note: Provided updates and PC software only work with
the ACE RC GT5 flybarless system.
Specifications
Term 7
+
GND-
Pulse (White)
(Red)
(Black)
Step 1-3:
Select which destination folder you want to install.
Step 1-4:
If you want to install driver click Yes or clik No to
finish installation.
Step 2 : Driver installation
Step 2-1:
The driver installation will be launched automatically
after GT5 Tools setup.
Step 2-3:
The driver installation is finished.
When you connect the interface to the pc, windows
recognize the device and install it as a new device.
Connection to PC
Operating System
Description
Item No.
PC Connector
Cable Length
Dimension WxLxH
Weight
USB Dongle
2709
USB
Windows 8/7/Vista/Server 2003/XP/2000
Mac OS-X/OS-9
1.5M
19.2x44.7x10.5 mm
15g
BATTERY
Step 2-2:
Choose I accept this agreement.
For Mac OS
Execute the GT5 tools.dmg