Airaid 1020 - Manual

Parts List
#1 ECONOAID x1
#2 Gasket x2
1. Disconnect the negative battery cable!
Using a 5mm Allen wrench remove the 4 Allen bolts that se-
cure the beauty cover to the engine. Remove the cover and set
it aside. 2. A.) Loosen the two hose clamps that secure the air intake
tube between the air cleaner box and the throttlebody. B.) Us-
ing pliers, squeeze the hose clamp that secures the crankcase
breather hose to the valve cover and slide the it up the breather
hose so it won’t get lost. Remove the intake tube assembly and
set it aside.
Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro-
ceeding with the installation. Contact ECONOAID @ (888) 876-4676 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit
or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that
no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.
Tools Required For Installation
5/16”, 10mm Sockets
Ratchet and Extension
5mm Allen Wrench
Pliers
Part Number 1020
2002-06 Nissan Altima 2.5L
2002-06 Nissan Sentra 2.5L SE-R & SE-R
SPEC V
2003 Nissan Sentra 2.5LE
2004 Nissan Sentra 2.5S
A
B
A
B
U.S. Pat. #7,665,442