H3C Technologies H3C S10500 Series Switches - Manual

Tools Required 准备工具
2
Removing a Fan Tray 风扇框的拆卸
Prepare an antistatic mat. 准备一个防静电垫子，用于放置拆卸下来的风扇框。
Put on an ESD-preventive wrist strap and make sure it has a good skin contact and is well
grounded.佩戴防静电手腕，请确保防静电手腕与皮肤良好接触，并确认防静电手
腕已经良好接地。
Loosen the captive screws on the fan tray with a screw driver.
使用螺丝刀松开风扇框的松不脱螺钉。
Hold the handle of the fan tray and gently pull out the fan tray from the chassis with one
hand. After the fans stop rotating, support the fan tray with another hand to take out the
fan tray, as shown in the following figure.一手拉住风扇框的把手，将风扇框缓慢拉出机
箱，待风扇停转后，用另一手托住风扇框下方的手托区域，将风扇框取出。
Put the removed fan tray on an antistatic mat or in its shipping package.
将风扇框放置到防静电垫子上。
ESD-preventive wrist strap
防静电手腕
Phillips screwdriver
十字螺丝刀