Installing mounting brackets, Figure 10 – H3C Technologies H3C S10500 Series Switches User Manual

Page 22

Advertising
background image

14

Figure 10 Attaching cable management brackets to an S10504

(1) Attach the cable management bracket to the chassis
(2) Screw holes for installing the cable management bracket
(3) Screws for attaching the cable management bracket to the chassis
(4) Power cable management bracket (installed at the lower part of the chassis)

Installing mounting brackets

Before installing the switch to the rack, install the mounting brackets to the chassis. Marks L and R are

printed inside the mounting brackets to distinguish between the left and right mounting brackets. To

install the mounting brackets, face the front of the switch, and mount the left and right mounting brackets
to the two sides of the switch, as shown in

Figure 11

.

Figure 11 Installing the mounting brackets (S10508)

(1) Screws for attaching the mounting brackets to the chassis

(2) Mounting brackets

(3) Signal cable management brackets

1

1

2

2

3

3

Advertising
This manual is related to the following products: