Air filters, Transceiver modules – H3C Technologies H3C S10500 Series Switches User Manual

Page 80

Advertising
background image

72

Air filters

CAUTION:

Clean air filters periodically (at least once every three months) to guarantee adequate ventilation and
avoid over-temperature.

To prevent dusts from entering the chassis, you can configure air filters for the switch as needed and
install the air filters at the air intakes.
The H3C S10500 Switch Series air filters include the S10504 air filter, the S10508 air filter, the

S10508-V air filter, and the S10512 air filter. Order air filters compatible with your switch.

Transceiver modules

The switch supports transceiver modules. You can order transceiver modules according to the transceiver

modules supported by the LPU interfaces. For more information, see

Table 19

.

The switch supports the following transceiver modules:

10-Gigabit XFP modules listed in

Table 23

10-Gigabit SFP+ modules listed in

Table 24

10-Gigabit SFP+ cables listed in

Table 25

Gigabit SFP modules listed in

Table 26

100-Mbps SFP modules listed in

Table 27

QSFP+ modules listed in

Table 28

QSFP+ cables listed in

Table 29

QSFP+ to SFP+ cables listed in

Table 30

40-Gigabit CFP module listed in

Table 31

100-Gigabit CFP module listed in

Table 32

Table 23 XFP module specifications

10-Gigabit XFP

module

Central

wavelength

Connec

tor

Cable

specifications

Modal

bandwidth

Maximum

transmission

distance

XFP-SX-MM850 850

nm LC

50/125 μm
multimode fiber

2000
MHz*km

300 m (984.25 ft)

500 MHz*km

82 m (269.03 ft)

400 MHz*km

66 m (216.54 ft)

62.5/125 μm
multimode fiber

200 MHz*km

33 m (108.27 ft)

160 MHz*km

26 m (85.3 ft)

XFP-LX-SM1310 1310

nm LC

9/125 μm
single-mode fiber N/A

10 km (6.21 miles)

XFP-LH40-SM1550 1550

nm LC

9/125 μm
single-mode fiber N/A

40 km (24.86 miles)

Advertising
This manual is related to the following products: