H3C Technologies H3C S10500 Series Switches - Manual (Page 85)

77
Table 31 40-Gigabit CFP module specifications
40-Gigabit CFP
module
Central
wavelength Connector Cable
specifications
Maximum
transmission distance
LSUM1CFP0 1310 nm LC 9/125 μm single-mode fiber 10 km (6.21 miles)
Table 32 100-Gigabit CFP module specifications
100-Gigabit
CFP module
Central
wavelength
Connector Cable specifications
Maximum
transmission distance
CFP-100G-LR4-
WDM1300
• 1295.56 nm
• 1300.05 nm
• 1304.58 nm
• 1309.14 nm
LC 9/125 μm single-mode fiber 10 km (6.21 miles)
DC power cable
DC power cables are used for connecting the DC power modules of an S10500 switch to the external DC
power supply system.
Table 33 DC power cable specifications
DC power cable Cable length Description
0404A0E1 3 m (9.84 ft)
Used on the LSUM1DC2400
power module
0404A0E2 15 m (49.21 ft)
AC power cable
AC power cables are used for connecting the power modules of an S10500 switch to the external AC
power supply system.
• Select AC power cables according to the power of the power module.
• The connector type varies by country or region. Select a compliant connector type as needed.
• For the power module LSUM2AC2500 of the H3C S10500 Switch Series, select 16A AC power
cables. For the connector types of different countries or regions, see
Table 34 .