H3C Technologies H3C S10500 Series Switches User Manual
Irf configuration guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Title Page
- Preface
- Contents
- IRF configuration
- IRF overview
- Basic concepts
- Establishment, operation, and maintenance of an IRF fabric
- IRF fabric configuration task list
- Pre-configuring an IRF member switch in standalone mode
- Saving configuration to the startup configuration file
- Switching operating mode
- Accessing an IRF fabric
- Configuring IRF member switches in IRF mode
- Specifying an IRF domain ID for an IRF fabric
- Modifying a member ID for a switch
- Specifying a priority for a member switch
- Configuring IRF ports
- Enabling auto reboot for IRF fabric merge
- Configuring a description for a member switch
- Configuring load sharing criteria for IRF links
- Specifying the preservation time of bridge MAC address
- Enabling automatic system software updating
- Setting the IRF link down report delay
- Configuring MAD detection
- IRF configuration fast recovery
- Displaying and maintaining an IRF fabric
- IRF fabric configuration examples
- LACP MAD detection-enabled IRF configuration example (with two member switches)
- BFD MAD detection-enabled IRF configuration example (with two member switches)
- LACP MAD detection-enabled IRF configuration example (with four member switches)
- BFD MAD detection-enabled IRF configuration example (with four member switches)
- Switching the operating mode of IRF member switches from IRF to standalone
- Index