Connecting the psr2800-acv power cord, Connecting the psr6000-acv power cord – H3C Technologies H3C S7500E Series Switches User Manual
Page 19
16
Connecting the PSR2800-ACV power cord
The PSR2800-ACV is a built-in power module with AC input and DC output. It provides one system power
socket and one PoE power socket. The methods for connecting the system power cord and PoE power
cord are similar to connecting the PSR1400-A power cord. For more information, see "
."
Connecting the PSR6000-ACV power cord
The PSR6000-ACV is a built-in power module with AC input and DC output. It provides one system power
socket and three PoE power sockets. Connecting the system power cord is the same as connecting the
PoE power cord. The following illustrates how to connect the system power cord.
To attach the power cord retainer suite:
1.
Fasten the retainer suite to the plug of the power cord, making sure you can align the screw holes
in the retainer suite with the screw holes in the power module.
If you cannot align the screw holes in the retainer suite with the screw holes in the power module,
pull the cable retainer suite outwards, rotate it by 180 degrees, and push it in until it is secured in
place.
2.
Use a Phillips screwdriver to fasten the two parts of the retainer suite together.
Figure 19 Attaching the power cord retainer suite
(1) Screw holes for connecting the retainer suite to the power module (2) Power cord plug
(3) Screw holes for connecting the two parts of the retainer suite
3.
Insert the power cord into the power socket on the power module, and fasten the power cord
retainer suite to the power module.