Edimax Technology EW-7206Apg - Manual (Page 24)

Wireless LAN Access Point Configuration
When this access point is in “Station-Ad Hoc mode”, “Station-Infrastructure
mode” or “Universal Repeater mode”, it should associate with an access point
or station and connect to your wireless LAN through the associated access
point or station. “Wireless Site Survey” searches for all available access
points near by. You can select one access point listed in this table.
3.2.3 Advanced Setting
You can set advanced parameters of this access point. The parameters
include Authentication Type, Fragment Threshold, RTS Threshold, Beacon
Interval, Tx Operation Rate, Tx Basic Rate, Preamble Type, Broadcast
ESSID. You should not change these parameters unless you know what
effect the changes will have on this access point.
22