Resetbuttonfunction, Typicalapplication, 9 reset button function – Hongdian H8951 3G/4G Wi-Fi router User Manual

Page 121: 6 typical application, Typical application, About this chapter

Advertising
background image

H8951 3G/4G Router

5 Router config

(2014-07-01)

- 105 -

Parameter

Details

Operation

Static route

Priority

Priority the router select route

---END

5.9 RESET button function

“RESET” button is on the rear panel and next to power interface. This button can be used
when the router is in use or when the router is turned on. Three are 3 functions to press
“RESET” button when the router is in use:

Press “RESET” for about 2 seconds, router will reboot.

Press “RESET” 5-10 seconds, the router will reboot, meanwhile, the router will be resumed
to default factory setting configuration.

Press “RESET” over 20 seconds, the router will reboot, and get into CFE upgrading. The
router is resumed to default factory setting configuration.

Press button when the router is turned on:

Press “RESET” button and turn on the router, and keep pressing “RESET” for 2 seconds. The
router will get into CFE upgrading mode.

---END

6

Typical application

About this chapter

Chapter

Content

6.1 Overview

Summary some typical application of H8951 3G/4G router

6.2 Awake function

How to awake H8951 3G/4G Router if not auto-dial

6.3 Parameter select

Parameter switch to achieve SIM backup function

6.4 VPN

H8951 3G/4G Router VPN setting

6.5 Timing Task

Set Timing task on H8951 3G/4G Router

Advertising