Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 64)

5 Router config H8951 3G/4G Router
(2014-07-01) - 48 -
Parameter Details Operation
configuration successfully, the router
reported Trap IP packet source address
is the loopback address, If the
"Loopback Status" to "Disabled" means
router IP packet source address for the
LAN port address
Step 4 Single click “save” icon to finish SNMP configuration.
MIB for SNMP can be downloaded from our website, if necessary, please contact our technical
engineers.
---END
5.3.4 M2M configuration
H8951 3G/4G router has embedded a WMMP (Wireless Machine-to-Machine Protocol)
protocol to realize communication with M2M (Machine-to-Machine) platform which can
remotely monitor and manage the routers and its network, e.g. visit the router, patch
upgrading, firmware upgrading, parameter configuration, monitor the network strength, time
delay, flow. Its configuration is as follows:
Step 1 Log-on WEB GUI of H8951 3G/4G router.
Step 2 Click “Applications > M2M” to open M2M configuration tab.