Irritrol RainSensor User Manual

User’s guide, Wireless rainsensor, Introduction

Advertising
background image

Introduction

Congratulations on your purchase of the Irritrol Wireless RainSensor. The Wireless
RainSensor components are designed for easy installation, so your sensor-controlled
irrigation system will be up and running in minutes.

Before attempting the installation, please read through these instructions in their
entirety, and refer to the installation instructions for your irrigation system
controller/timer in regards to connecting a rain sensor or rain switch. The Wireless
RainSensor is designed to work with either Normally Open or Normally Closed
sensor circuits.

Important: Please note the following information regarding installation and
use of the Wireless RainSensor components:

• The RainSensor Receiver Module is designed to operate with 24 VAC power

only. Connecting the receiver wiring to 120/240 VAC power will result in
equipment damage and may void warranty.

• Installation methods must comply with all applicable national and local

building codes. If you are unsure about proper wiring practices, have a
qualified contractor perform the installation for you.

• The Receiver cover should always be used when the Receiver is installed

outdoors.

• The Sensor/Transmitter should never be submerged in water or installed

inside a rain gutter.

Wireless RainSensor

TM

Models RS1000 and RFS1000 (+Freeze)

User’s Guide

Contents

Page

Component Overview . . . . . . . . . . . .2
Quick Start Installation Instructions . .3
Detailed Installation Instructions . . . .4

• Connecting the Receiver

Control Wires . . . . . . . . . . . . . .4–5

• Connecting the Receiver

Power Wires . . . . . . . . . . . . . . . . .6

• Initial Receiver Testing . . . . . . . . .6
• Rainfall Adjustment . . . . . . . . . . . .7
• Vent Ring Adjustment . . . . . . . . . .7
• Mounting the Sensor Transmitter .7
• Freeze Sensor Installation . . . . . .8

Wireless RainSensor Operation . . . .9

• Normal Operation . . . . . . . . . . . . .9
• Smart Bypass . . . . . . . . . . . . . . . .9
• Power Down . . . . . . . . . . . . . . . . .9
• Receiver Learn Mode . . . . . . . . . .9
• Attention Required . . . . . . . . . . . . .9

Battery Replacement . . . . . . . . . . . .10
Changing Sensor/Transmitter Code .10
Troubleshooting . . . . . . . . . . . . . . . .11
Specifications . . . . . . . . . . . . . . . . .12
Electromagnetic Compatibility . . . . .12
Technical Assistance Numbers . . . .12

Receiver

Sensor/Transmitter

Advertising