Oscillator mixer – LinPlug MorphoX User Manual

Page 15

Advertising
background image

Oscillator Mixer

In the Oscillator Mixer you can adjust the volume of the two oscillators and
the noise source.

The dials Osc 1 and Osc 2 can be turned into “red”, which means that their
volume can be turned so high that it saturates at the filter input and thus
produces new harmonics.

The Ring (ring-modulation) parameter below the Osc 2 dial allows a
gradual adjustment of how the output of Oscillator 2 is made from Oscillator
2 and its integrated Amplitude- and Ring-Modulator (see glossary for
explanation of Amplitude- and Ring-Modulation).
Turned fully left the output of Oscillator 2 is purely Oscillator 2. Turned fully
right the output of Oscillator 2 is fully the ring modulation result of Oscillator
1 and Oscillator 2. In middle position the output is mix of Oscillator 2 and
the ring modulation result (which is the same as Amplitude Modulation or in
short AM).

MorphoX user manual 1.1.0

page 15

Advertising