LinPlug MorphoX User Manual

Page 25

Advertising
background image

Glide

Glide continuously changes the pitch from one note to the next, connecting
the notes and letting you smoothly "glide" from one to the other (sometimes
called portamento).

Glide has 3 modes: Off, Held and On. The On and Off functions turn "Glide"
on and off. The "Held" setting is similar to On, but works as follows: If notes
overlap then Glide is applied, however if they don't overlap then the notes
are played without Glide. This makes it possible to apply Glide only to
selected notes..

The Time dial controls the time it takes to move from one note to the next. It
will take the same amount of time to reach the destination pitch regardless
of whether the preceding notes are a semitone apart or an octave apart.

Precision

The "Precision" control below the Glide section can be used to set the
accuracy of the LinPlug MorphoX's signal generation. When the "Precision"
control is set to less than 100% small inaccuracies are introduced at
various points in the LinPlug MorphoX's signal chain. This is useful if you're
trying to replicate the warmth of an old analog synthesizer. Precision can be
set in a range from 90% to 100%.

MorphoX user manual 1.1.0

page 25

Advertising