Panasonic Lumix DMC-G85M - Manual (Page 32)

Recording
32
DVQX1003 (ENG)
Controlling Focus After Recording
(Post Focus/Focus
Stacking)
Applicable modes:
The camera can perform Burst recording in the same picture quality as 4K photo recording
while automatically shifting the focus to different areas. After the recording, you can select
the desired area on the screen and save a picture in which the selected area is in focus.
You can also merge multiple pictures with different focus areas to widen the focus range.
(Focus Stacking)
•
We recommend that you use a tripod when recording images to be used for Focus Stacking.
• Use a UHS Speed Class 3 card. (P11)
• The angle of view becomes narrower when the Post Focus function is in use.
1
Set the drive mode dial to [ ].
2
Decide on the composition, and press the shutter
button halfway.
•
Auto Focus will detect focus areas on the screen.
(Excluding the edges of the screen)
• If no areas on the screen can be brought into focus, the
focus display (A) will flash. Recording is not possible in
this case.
3 Press the shutter button fully to start recording.
•
The focus point changes automatically while recording.
When the icon (B) disappears, recording automatically ends.
• A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
• When [Auto Review] is enabled, a screen that lets you select the desired focus area will
be displayed. (P33)
• If the surrounding temperature is high, recording is performed continuously with the Post Focus
function, or the temperature of the camera rises, [
] may be displayed and recording may
stop halfway through to protect the camera. Wait until the camera cools down.
From the time you press the shutter button halfway until the end of recording:
• Maintain the same distance to the subject and the same composition.
• Do not operate the zoom.
5 m 04 s
4K
4:3
残
5 m 04 s
A
B
DMC-G85MBody_P&PP-DVQX1003_eng.book 32 ページ ２０１６年７月２７日 水曜日 午後３時３５分