Panasonic Lumix DMC-G85M - Manual (Page 67)

67
3. Recording Modes
In Program AE Mode, you can change the preset aperture value and shutter speed without
changing the exposure. This is called Program Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Program AE Mode.
1 Press the shutter button halfway and display the aperture value and shutter
speed value on the screen.
2
While the values are displayed (about 10 seconds),
perform Program Shift by rotating the rear dial or
front dial.
A Program Shift indication
• To cancel Program Shift, turn off this unit or rotate the
front/rear dial until the Program Shift indication disappears.
Program Shift can easily be canceled by setting a function button to [One Push AE].
(P73)
Not available in these cases:
• Program Shift is not available in the following cases:
– When recording 4K photos
– When recording with the Post Focus function
– When the ISO sensitivity is set to [ ]
Program Shift
60 60 60 4.0 4.0 4.0 2
00
SS SS SS
FF
0 98 98 98
250 15
4.0 5.6 8.0
30 60 125
A