Parkside High-Pressure Extension Hose - Manual

1 High pressure connection
on the equipment hose
2 High pressure connection
on the gun side
3 Adapter for high pressure connection
on the gun side
4 Adapter for high pressure connection
on the equipment hose
Also observe the safety instruction
for your pressure washer.
Pressure washers can be dan-
gerous if used incorrectly. Do
not direct the jet at people, ani-
mals, live electrical equipment or the
equipment itself.
Technical specifications
High-pressure hose
Length................................................. 6 m
Max. pressure ................160 bar / 16 MPa
Intake temperature ......max. 60°C / 140°F
1 2
Initial Operation
Screw the high pressure connection on
the equipment hose (1) to the high pres-
sure hose of your pressure washer.
Screw the high pressure connection on
the gun side (2) to the spray gun of your
pressure washer.
The high pressure extension hose is an
accessory for PHD 150 A1. For use with
another device, the enclosed adapters 3
and 4 may be helpful.
Be aware of the increased risk of
tripping when using your pressure
washer with the high pressure ex-
tension hose.
3 4
GB