Emerson Process Management Control Wave SCADA RTU - Manual

Product Data Document
420DS-12A
October 1, 2007 - Page 1
Integrated Pump Control
SCADA RTU
Website: www.EmersonProcess.com/Remote
Remote Automation Solutions
Benefits
Pre-programmed package eliminates the need •
for custom programming
One package for one to three pumps provides
•
consistency for operators and technicians
Local Display/Keypad Operator Interface panel
•
for on-site system control
Alarm and historical data reporting for full
•
SCADA integration
Multiple pump scenarios allow flexibility to meet
•
a wide range of applications
Pump start/stop as well as VFD speed control
•
Easy-to-use web page station configuration and •
setup
Easily interfaces to field devices and sensors
•
Security and water quality functions can be •
easily added as needed
Plant managers will take maximum advantage of
the flexibility and maintenance personnel will ap-
preciate the simplicity of the Bristol ControlWave
pump control application. All remote water and
wastewater applications have the same require-
ments to automatically control one or more pumps
to maintain level, pressure and/or flow. Some sites
may also have the need to control chemical feed,
measure rain level, and detect intrusion events. All
of these are pre-programmed and available for use
to customize for the specific site.
When the application requires modifications or addi-
tions to the standard program, Bristol ControlWave
Designer allows unlimited customization by your
engineering staff or other integrators.
Single program offers performance and simplicity
for monitoring and control of remote water and
wastewater applications
Well station •
Remote tank level control •
Reservoir Control •
Duplex Lift or Booster station •
Triplex Lift or Booster station •
This standard pre-programmed application lever-
ages our decades of experience monitoring and
controlling remote pumps in a wide variety of water
and wastewater sites in North America and through-
out the world. The standard application can be
used with the appropriate Bristol ® ControlWave ®
PLC/RTU, from Emerson Process Management to
meet the I/O requirements at the various sites. The
combined solution offers a cost effective system that
is ready to deploy without the typical programming
overhead.
Pre-Engineered Water and Wastewater
Remote Pump Control Application Package