Replacing the cpu fan, Replacing the thermal module, Replacing the cpu fan replacing the thermal module – eMachines G630 User Manual
Page 104
94
Chapter 3
Replacing the CPU Fan
Replacing the Thermal Module
IMPORTANT: Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal
Module.
The following thermal grease types are approved for use:
•
Silmore GP50
•
Honeywell
•
Jet Motor 7762
The following thermal pads are approved for use:
•
Eapus XR-PE
1. Align the screw holes on the CPU Fan and
Mainboard and replace the Fan.
2. Replace the three (3) screws to secure the Fan to
the Mainboard.
3. Connect the Fan power cable to the Mainboard connector.
1. Remove all traces of thermal grease from the CPU using a lint-free cloth or cotton swab and Isopropyl
Alcohol, Acetone, or other approved cleaning agent.
2. Apply a small amount of thermal grease to the centre of the CPU—there is no need to spread the grease
manually, the force used during the installation of the Thermal Module is sufficient.