Nikon KeyMission 80 User Manual

Wi-fi connections (ios)

Advertising
background image

SB6K01(11)

6MN72211-01

En

Wi-Fi Connections (iOS)

Read this guide for information on using SnapBridge for Wi-Fi connections on iOS devices.

Why Is the Wi-Fi Prompt Displayed?

Why Is the Wi-Fi Prompt Displayed?

The Wi-Fi prompt is displayed when:
SnapBridge switches from Bluetooth to Wi-Fi.

SnapBridge automatically switches between
Bluetooth and Wi-Fi to save power. The Wi-Fi
prompt is displayed when SnapBridge switches
from Bluetooth to Wi-Fi. Note that SnapBridge
may need a few seconds to switch to Wi-Fi after
you perform such operations as selecting remote
photography in the Camera tab.

SnapBridge detects the camera after losing the Wi-Fi

connection. The connection will be lost when
your iOS device locks or the camera enters
sleep mode, in which case your device may
automatically connect to another network.
The Wi-Fi prompt will be displayed as needed
when SnapBridge detects the camera again.
The Wi-Fi connection may also be lost due to
strong interference or as a result of exiting the
SnapBridge Camera tab.

Trademark Information

Trademark Information

• The Bluetooth® word mark and logos are

registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Nikon
Corporation is under license.

• iOS is a trademark or registered trademark of

Cisco Systems, Inc., in the United States and/or
other countries and is used under license.

• Wi-Fi and the Wi-Fi logo are trademarks or

registered trademarks of the Wi-Fi Alliance.

The Wi-Fi Prompt

The Wi-Fi Prompt

A Wi-Fi prompt will be displayed when SnapBridge
requires a Wi-Fi connection. Follow the steps
below to connect to the camera via Wi-Fi.

1

Tap Go when prompted.

2

Tap < Settings to display
iOS settings.

3

Tap Wi-Fi.

4

Tap KM80_XXXXXXXX.

5

Enter the camera
password if prompted
(the default password is
“NikonKeyMission”).

D

Changing the Default Password

We recommend that you change the default password
to protect your privacy. The password can be changed
by pressing the camera

G

button to view the Home

display and selecting Camera settings > Network
menu
 > Wi-Fi > Network settings in the

(setup)

menu.

Advertising